The Dynamelt and Dynamini hot melt systems have an easily accessible hot melt filter located in the top of the hot melter manifold.

Hot melt adhesive can cause severe burns, therefore it is critical that users are very careful when operating on or with this machine. When working with this filter please remember to wear protective gloves, clothing, and glasses to prevent burns and other related dangers. It is also important to turn off both air and power to your hot melt system before servicing the filter in the hose manifold.

We suggest that you read all manuals for the Dynamini and Dynamelt prior to servicing the unit as well.

After performing the preventative and initial steps above, remove the cover plate covering the top of the hose manifold.

With an M5 Allen wrench vent the pressurized adhesive from the hose manifold as shown in the video to be shown below.

Finally, with a 5/8 wrench remove the large bolt and extract the 40 or 100 mesh filter from the hose manifold.

Dynamini/Dynamelt Filter Removal Animation on Youtube

Call or email Glue Machinery service technicians with any questions regarding the Dynamini or Dynamelt. Please note that all parts are available and often ready for immediate delivery with one call for these units.

4234 Boston St, Baltimore, Maryland 21224
Toll Free 1-888-202-2468 | Phone: 410-761-2727 | Fax: 410-761-5127 | Email: info@gluemachinery.com

Tags: , , , , ,