Hot Melt News

Label Gluer Lite by Glue Machinery Corporation

The Label Gluer - Lite is a simple cold glue roll coater that applies water based adhesive to paper and other thin materials.

Simply pour the P200 (or other) water based adhesive into the Label Gluer-Lite glue pan, turn on the constant speed roller, adjust the coat weight on the wheel, and lastly feed the paper into the gluer. The paper is lightly wrapped around the wheel, which is where adhesive is transferred. This wheel specifically applied adhesive glue to the back of the paper and not to the edges or the front.

The adhesive coat weight produced is precise and consistent. One way to ensure optimal application precision is to keep the wheel and adhesive clean. When done with the system the clean up is quite simple, only taking five to ten minutes.

This cold glue roller gluer can apply a range of water based adhesives that permanently bond fabric to paper and several other materials as well.

In the video below, our customer had the need to bond fabric to paper. We successfully demonstrated how the Label Gluer Lite is a great solution for this process.

The Label Gluer- Lite is also used in industrial assembly applications and other high capacity manufacturing needs.

Contact Pierce Covert at Glue Machinery Corporation to discuss your project and how Glue Machinery can offer you the best solutions and options available.

Non woven materials can be easily bonded together with hot melt adhesive. Glue Machinery recently demonstrated this successful process to a customer wanting a quick, strong, and effective bond of these kinds of materials.

The Champ 3 with Slot Die is used to apply a thin flat pattern of hot melt adhesive for bonding nonwoven materials to other nonwoven material.

Champ 3 Non Woven Demo on Youtube

For this application, manually tilt the Champ 3 so that the Slot Die nozzle is at a 30 degree angle relative to the substrate, depress the piston pump trigger, and finally move the gun across the substrate to apply a thin pattern.

It is recommended that you use a hot melt with a long open time and medium viscosity to insure that you have ample assembly time. This also ensures that the adhesive does not migrate too deeply or through the porous non-woven material.

Please note that other application methods can be used to bond non woven materials. (Click here for video of another example) Contact Pierce Covert at Glue Machinery Corporation to discuss your particular needs and wide range of options we have to offer.

The IWF 2008 or International Woodworking Fair 2008 is regarded as one of the best resources to find the latest info on machinery and supplies pertaining to the woodworking industry .

The International Woodworking Machinery & Furniture Supply Fair - USA® is one of the world’s largest trade show for the furniture manufacturing, architectural woodwork, custom and general woodworking industries - and it’s more than woodworking. IWF also meets the needs of the engineered wood product, composite, wood substitute, display and store fixture, plastic fabricating, flooring, surfacing and laminating, and upholstery industries. ~www.IWFatlanta.com

Although there are numerous companies that supply “Glue Machinery” at these types of conventions, we often find that basic products can be, and are, often overlooked by specialized product promoters. Glue Machinery Corporation prides itself in offering a wide range of glue machinery for woodworking (and many other industries) that range from basic to advanced application processes. Whether you need a simple system or a highly customized system for your process, Glue Machinery Corporation has the perfect fit for your particular needs.

Basic systems and related accessories needed for assembly of wooden substrates, such as simple hand systems for hot melt and cold glue systems are two solutions Glue Machinery Corporation has to offer.

Glue Machinery has a simple and industrial strength cold glue product line that has proven successful for many woodworking companies. Our ezGluer and ezGluer Basic Systems offer straightforward and effective cold glue application at an affordable price. We also offer several cold glue handguns, nozzles, and related adhesive dispensing equipment. Our R and Z coating machines are another popular product for customers needing to apply consistent coating to their wood and other project substrates.

The Dynamini Package allows for bulk ‘melt on demand’ adhesives to be dispensed consistently, with little or no down time needed for adhesive refill. It allows for 12-17 lb. per hour melt rate capability, depending upon adhesives used.

Glue Machinery Corporation has found that their PUR and Hot Melt adhesives give a superior bond, with incredible strength, in the shortest amount of time. Glue Machinery Corporation offers their PURgun, and Champ PUR with adhesives such as PUR Titebond, and CFA1013 as competitive and effective solutions for your woodworking needs.

We hope you enjoy your IWF experience and look forward to talking with you while you evaluate future purchases during/after these conventions.

Contact Pierce Covert for quotes, information, or if you have any questions at info@gluemachinery.com or call 1-888-202-2468.

Please visit our product website at www.gluemachinery.com

The Dynamelt and Dynamini hot melt systems have an easily accessible hot melt filter located in the top of the hot melter manifold.

Hot melt adhesive can cause severe burns, therefore it is critical that users are very careful when operating on or with this machine. When working with this filter please remember to wear protective gloves, clothing, and glasses to prevent burns and other related dangers. It is also important to turn off both air and power to your hot melt system before servicing the filter in the hose manifold.

We suggest that you read all manuals for the Dynamini and Dynamelt prior to servicing the unit as well.

After performing the preventative and initial steps above, remove the cover plate covering the top of the hose manifold.

With an M5 Allen wrench vent the pressurized adhesive from the hose manifold as shown in the video to be shown below.

Finally, with a 5/8 wrench remove the large bolt and extract the 40 or 100 mesh filter from the hose manifold.

Dynamini/Dynamelt Filter Removal Animation on Youtube

Call or email Glue Machinery service technicians with any questions regarding the Dynamini or Dynamelt. Please note that all parts are available and often ready for immediate delivery with one call for these units.

4234 Boston St, Baltimore, Maryland 21224
Toll Free 1-888-202-2468 | Phone: 410-761-2727 | Fax: 410-761-5127 | Email: info@gluemachinery.com

Glue Machinery Corporation offers a simple system for fast permanent gluing of mortise and tenon joints. Wikipedia explains these joints as follows:

“Simple and strong, the mortise and tenon joint (also called the mortice and tenon) has been used for millennia by woodworkers around the world to join pieces of wood, usually when the pieces are at an angle close to 90°. Although there are many variations on the theme, the basic idea is that the end of one of the members is inserted into a hole cut in the other member. The end of the first member is called the tenon, and it is usually narrowed with respect to the rest of the piece. The hole in the second member is called the mortise. The joint may be glued, pinned, or wedged to lock it in place.” (Wikipedia)

For this process, simply extrude precise volumes of Glue Machinery Corporation’s PUR Reactive Moisture Curing Adhesive into your mortise, insert the tenon, clamp the component for 10-20 seconds, and finally you have a strong immediate bond that allows you to handle the part instantaneously. An impressive 50 to 75 % of the final bond is achieved in this incredibly short time frame.

The beauty of PUR hot melt is that it cures with moisture, in 24 to 48 hours, becoming a far stronger, more flexible product than any water based adhesive. Customers have reported that PUR can offer four times the strength of the best water based woodworking PVA adhesive.

Custom 4 Module Microgun PUR Applicator by Glue Machinery Corporation

The system pictured here consists of our custom four module Micro Gun with seal tips. The process consists of a couple simple steps: First, line up your mortise under this nozzle set, then actuate the foot switch for a premeasured quantity of PUR to be extruded at very low pressure. The custom applicator is available in one to twenty modules or nozzle tips and can also contain two independant stations operating from one central melter.

The other components of the system are a four way solenoid to cycle the gun, adjustable timer attached to the footswitch, flexible heated hose, and PUR melter or TOF20-Mini five gallon hot melt pail unloader. You can visit our product page at Gluemachinery.com by clicking here.

For more information call or email Pierce Covert at Glue Machinery Corporation

Most padded and upholstered seats or seat backs used in the transportation industry are assembled with a solvent based contact adhesive. In this process the fiberglass or steel base of a seat or seatback is bonded to foam, which is then bonded to re-enforced fabrics, and finally covered with cloth. Due to the high traffic of these seats, they typically have a seven + year duty cycle. Given these conditions it is often required that lamination between these substrates be permanent.

Most assembly and recovering companies that perform this service are looking for alternatives to flammable spray products such as contact cement. Along with the need for adhesive alternatives, the need to have easier removal of the foam cushioning from the fiberglass or steel bases has been expressed.

Glue Machinery proposes that PUR reactive hot melt is a good alternative. It is easily sprayed onto one side of each component, it bonds quickly, and it cures to a very strong bond. When it is time for this component to be re-upholstered, the materials can be removed with high heat as the PUR bond is softened at temperatures over 300 F.

PUR Upholstering on YouTube

PUR is also available for smaller jobs or spot welding in 10 ounce cartridges, which are processed by PUR Cartridge Spray guns. For larger volume applications the heated five gallon pail unloader TOF20 Mini with heated swirl hose and handgun is used to dramatically increase output and cut the cost of the PUR hot melt.

Email Pierce Covert (info@gluemachinery.com) at Glue Machinery Corporation to discuss your specific needs and how we can improve or streamline your upholstering process.

Hot Melt Bulk Handguns are typically used in smaller applications or applications that require manual dexterity. Our product line features the Champ series Handguns. Each offers the perfect mix of functionality, durability, and ease of use You can also visit our sister site at www.hotmeltgluegun.com to view our collection of blogs and content relating to these superior machines.

	Benchtop Hot Melt units are used to create a “Hands Free” assembly environment for faster production of small components such as greeting cards. These units can carry significantly more adhesive than their handgun counterparts. Several modifications and options are offered.

Hot Melt Roll Coaters are used as an efficient way to coat a rigid or flat surface with hot melt to laminate products together such as specialized foam packaging and more. We also offer patterned wheels for increased customization and application enhancement.

FURTHER >>

Click here to explore our page of Hot Melt Adhesives - contact us if you do not find or don’t know which adhesive best fits your needs. We have your solution!

Be sure to visit our Hot Melt Application System Solutions page for a few example of the wide range of application specific packages we have produced for countless customers. Do you have a specific or unique application that requires a system solution? Contact us for advice, consultation, and pricing.

Booger Glue, what is it!?

Booger Glue is a glue that allows you to attach and detach/remove products from each other without causing damage to either substrate.

Booger Glue is used in credit card attachment, tipping of inserts into magazines, gift baskets, direct mail and hundreds of other applications.

In a more formal sense this glue is referred to as a Fugitive/Removable adhesive.

This glue is available as dots on release liner for small applications and in bulk hot melt form to be processed in a bulk hot melt handguns, benchmount hot melt systems, or fully automatic systems.

Fugitive adhesive usually stays attached to the substrate it is applied to. If one of the two substrate is porous, or easier to attach to, the fugitive glue will tend to remain with that substrate when separation occurs.

Please remember that there are many different types of Fugitive/ Removable adhesives that offer different bond capacities. Be sure to consult with Glue Machinery Corporation to determine the best adhesive for your needs.

Further reading: Recently we posted a youtube video of label application. The video is linked in our 04 Apr 2008 entry “Removable Label Gluing”